Close
Subscribe to newsletters
Email:

BN44-00201A SAMSUNG POWER SUPPLY REPAIR KIT FOR TV NOT POWERING ON


This is a repair kit for a problem commonly developed by power / inverter board BN44-00201A made by HANSOL and used in a number of Samsung LCD TV models.

Coppell TV Repair LLC offers you a repair kit for a problem commonly developed by power / inverer board  BN44-00201A made by HANSOL and used in a number of Samsung LCD TV models.

Failure symptoms, repair task difficulty level and other related and important information can be found below.

As with all repairs please note that we can not guarantee that this kit is all that is needed to fix the TV. It is offerred based on experience and technical information available to Coppell TV Repair at the time of the listing. For details please see the warranty conditions section below.

SKU Number: CTVRL-NO-PB-0039 .

Symptoms
TV refusing to turn on or taking time to turn on are the two most popular symptoms of vented capacitors on any LCD/LED TV power board.

Sometimes the power supply may give whining noise when TV is being turned on, but not necessarily.

Visual inspection of capacitors CM851,CM852,CM854 and CM855 near heat sink HS805 is recommended; puffed / swollen capacitors are a great indication for need of change.

Difficulty
If bare board replacement is considered easy then this is intermediate as it requires at least basic soldering skills.
Several components, such as the above mentioned capacitors, will have to be desoldered and replaced with replacements from the kit.

Kit contents
(CM851 and CM852), (CM854 and CM855), CM859, (CM856 and CM858).

If you see other bad capacitors on your board please contact us to secure them prior to placing an order;


Kit tested by Coppell TV Repair LLC:

Yes (with various success; we've see more than one case when this was not the only problem on the board, but we have seen more cases where it was all that was needed).

Notes
1) As with all power boards please exercise caution and allow the board 5-10 minutes after disconnecting from power before starting to work on it!

$13.95
:
TAGS