Close
Categories
Subscribe to newsletters
Email:

Repair service for power supply BN44-00175A for dead or shutting down Samsung plasma TV


This listing is for a diagnostic and repair service for Samsung power supply BN44-00175A.
$74.95

Coppell TV Repair offers a REPAIR SERVICE for Samsung power supply board BN44-00175A shown on the picture and used in some Samsung plasma TV models from the FPT series.

REPAIR SERVICE means that you need to send us your malfunctioning board that we will attempt to service, test and return to you.

The repair service is not limited to the described failure symptoms. We do what needs to be done to get the board working, provided it meets the below requirements.

Success is not guaranteed, but if we fail to succesfuly repair a failed board meeting our requirements (mostly not tampered with) we will not charge any service fees and you will only need to pay return shipping if you want the board back.

Power supply BN44-00175A failure symptoms

Failure in power supply board BN44-00175A is usually manifested as a completely dead TV (no front LED, no response to any power on command), a click indicating a response, but failure to start or random shutdown of either image or the whole set during operation.

Other failures are also possible, of course, and unfortunately some of the symptoms can also be caused by other failures in the TV.

Processing time

Typical processing time for the repair is within two business days; if we have any probems that require more time (be it overload or technical problems) we will contact you with an update and request for more time.

We have a fairly high success ratio, but we still do not guarantee success; if we can't get the board to work, though, you will not need to pay.

Payment

Presently we do not charge in advance for repair services.

Instead, once the board(s) are received, tested, found to be defective, serviced and tested again to success we send a payment request to the customer.

If something along the process - such as unexpected difficulty or finding a board to be functional - arises we contact the customer via email and/or phone and disscuss options.

Minimal charge / diagnostic fee

If a board arrives and is determined to be functional we charge up to $25 for diagnostic fee.

For explanation of why do we do that please read this article.

Board requirements

We ask that the board arrives here in good physical condition and without traces of tampering. If someone (other than us, that is) has already attempted to service the board then please contact us with a description/pictures and do not directly place an order. We reserve the right to refuse service to boards that have signs of repair attempts.

If you have any questions do not hesitate to ask.